Can Am

Extreme desert style cage is completely constructed from 4130 chromoly tubing, that’s not only stronger but lighter than other steel typically used...

Can Am X3 Lowrider Cage * 100% Chromoly fabricated in California, USA * 1.75″ diameter .083 wall chromoly tubing * All tig welded * Integrated V-Br...

Can-Am Maverick X3 Max - 4 Seat Chromoly CageExtreme desert style cage – is completely constructed from 4130 chromoly tubing, that’s not only stron...

Extreme desert style modular roof rack – constructed from .090 6061-t6, slotted on all 4 sides to give you fully functional tie down capability. We...

  This is a Aluminum Roof with Lexan inserts on both passenger and drivers side. These will make it easier to see as you approach a hill. A lot of ...

Laser cut aluminum 3d windshield frame with auto style tempered glass. This windshield kit can be installed on any of our X3 or X3 Max cages with n...

Aluminum full doors which fit the stock frames.  Fitment: Can Am 2 Seat X3, XRS, Turbo RR, XRC, XDS  30 minute install after doors are assembled.

Aluminum Full Doors, which fit the stock frames. 30 Min install after doors are assembled.

Sold in pairs (Will do 2 doors) Sewn over ends Zinc Plated Brackets Comes with all mounting Hardware

Can-Am Maverick X3 - Front Single Tube Replacement BumperExtreme Desert Style Bumpers – Are Completely Constructed From 4130Chromoly Tubing, That’s...

Extreme bumpers are completely constructed from 4130 Chromoly tubing, that’s not only stronger but lighter than other steel typically used for bump...

Can-am Maverick X3 - Dual Tube Front Bumper is completely constructed from 4130 chromoly tubing, that’s not only stronger but lighter than other st...

Extreme bumpers are completely constructed from 4130 Chromoly tubing, that’s not only stronger but lighter than other steel typically used for bump...

Can-Am Maverick X3 Chromoly Single Bar Rear Bumper (2017 - Present) Extreme desert style bumpers are completely constructed from 4130 chromoly tubi...

Can-Am Maverick X3 / X3 Max chromoly dual bar rear bumper with rear tie down tabs mounts.Extreme desert Style bumper – is completely constructed fr...

100% Tig welded - Chromoly Fabrication involved for install. Billet caps All hardware, tabs and spuds included. Sold Raw or Powder Coated (Select O...

Protect your SXS from unexpected damage and increase chassis rigidity with our chromoly Nerf Bars! 100% Tig welded chromoly Billet caps All hardwar...

Can Am X3 Fender Flare KitThese mount to the factory fenders using the pre marked holes.Steel mounting brackets (Texture black to blend into fender...

Can Am X3 Chromoly Front Sub Frame KitIts no secret the front of these cars are really weak. No more doing acomplete frame swap for front end frame...

Can Am X3 XRS Shock Tower Relocator This Shock Tower is not only a brace that ties the tower into the chassis but it moves the shocks out and up to...

Can Am X3 XRS Shock Tower Repair Kit This is for the person that did not install our Shock Tower kit already and had the stock tower break off. Thi...

Can Am X3 Rear Shock Tower Brace KitMade to prevent cracking on the upper shock towers.If you see the powdercoating cracking on your upper rear sho...

These arms fit the Can Am XRS 72” Models 4130 Chromoly Laser Cut Uses OEM Bal Joint and Grease Zerks

These arms fit the Can Am XRS 72″ Models Has the factory steering stops to prevent over extending the axles 4130 Chromoly 100% Tig Welded Comes w/ ...

The Strongest aftermarket Radius Rod Kit available for your Can Am Maverick X3 / X3 Max. Made for OEM 64" Width Suspension. 4130 chromoly 1.25” rod...

4130 Chromoly 1.25” Rods. Chromoly Hex Inserts so you can put a wrench on the rod while tightening hiem. Chromoly FK Bearing 3/4" Hiem Joints. Sta...

4130 Chromoly 1.25” Rods. Chromoly Hex Inserts so you can put a wrench on the rod while tightening hiem. Chromoly FK Bearing 5/8" Hiem Joints. Sta...

Can-am Maverick X3 Chromoly Weld On Gusset Kit

2017-present CAN-AM x3 / x3 Max HD tie rods 4130 Chromoly rods 17-4 High misalignment spacers FK Chromoly hiem joints Comes with everything you n...

Can-am maverick x3 lower a-arm taco kit – these help prevent the stock lower a-arm from folding.2 – weld in cross rods2 – weld in lower a-arm sleev...

This is our factory replacement trailing arm for the 72″ models, or youcan upgrade your standard or XDS model with these. 100% Chromoly 100% Tig We...

Our links are made from 6061 T6 Aluminum Billet Hex Material so you can get a wrench on it to adjust them. The Heim reducers are made from 17-4 Sta...

* These 3 plates go behind the rear bulk head and strengthen thefactory chassis. The also stay in place which makes it a lot easier tochange one or...

Front CV Rock Guards Kit comes with 2 brackets, 2 Rubber Guards and all necessary hardware. Note: Please specify if you have Stock brakes or our Bi...

These mount to the lower rear trailing arms and offer protection against rocks entering the wheel inner area. Which can cause wheel and brake damag...

Extreme desert style modular roof rack – constructed from .090 6061-t6, slotted on all 4 sides to give you fully functional tie down capability. We...

Can Am X3 / X3 Max Upper Visor Laser cut aluminum. This visor kit can be installed on our X3 or X3 Max cage with no fabrication. Comes with all mou...

Can Am X3 / X3 Max Lower ValanceLaser cut aluminum.This valance kit can be installed on our X3 or X3 Max cage with nofabrication.Held in place with...

Can Am X3 Chromoly Weld On Passenger Steering Rack Gusset Its a common problem for the factory steering rack mount to crack on a stock unit. We mad...

This allows you to screw the bolts in from the front side for the lower BulkHead and Lower Arms. The plate is bolted in and stays in place while ho...

Can Am X3 Big Brake KitBiggest Rotors Available. 12″ Front and Rear!4 Piston Wilwood CalipersComplete bolt on kitResidual ValvesONLY works with 15″...

Extreme Desert Style Radius Rod Support Plates – Is Completely Constructed From 4130 Chromoly, That’s NotOnly Stronger But Lighter Than Other Steel...

DO YOU HAVE A LIMP BED? Some Mfg's out there are building cages that don’t tie into the factory location on the X3. Not realizing that that support...

Laser cut aluminum number plate kit. This number plates can be installed on any of our X3 or X3 Max cages with no fabrication. Sold raw at this pri...

If you own a Can Am X3 then you are well aware of the heating issue. We designed this system with CBR Performance Radiators to get those temperatur...

Sold in pairs (Passenger and Drivers) Chromoly Tube Frame Powdercoated Black SFI Certified Nets Comes with all mounting Hardware NOTES: ONLY WORKS ...

If you are looking at this part you already know what happens to the factory mount. This Transmission Mount / Cross Member is made from Chromoly an...

Can-Am Maverick X3 / X3 Max chromoly low mount spare tire carrier rear bumper with tie down tabs mounts. This bumper mounts your spare tire down lo...